call us on: +86-755-29196695  E-mail: info@pcba-assembly.com  
Shenzhen Rigao Electronics Co.,Ltd
Tel: +86-755-29196695
E-mail: info@pcba-assembly.com
Product Categories
News
Home > News > Content

How To Remove The Chip From The PCB Board?

Shenzhen Rigao Electronics Co.,Ltd | Updated: Aug 27, 2015

General maintenance of the circuit, often demand from PCB Board Assembly of integrated circuits, due to IC pin and dense, difficult to assemble, and sometimes also the IC and PCB boards. IC Assembly of several effective approaches are summarized here for your reference.

Multi-strand copper desoldering Assembly method: is the use of multiple copper core plastic wire, remove the plastic covering, use stranded copper conductor wire (short head). Stranded copper conductor wire before using Rosin on alcohol, soldering irons heat stranded copper conductor wire to the block pin on heating, so that the solder on the pins will be copper adsorption, solder on the partial cut, repeated it several times you can suck all the solder on the pins. Request can also use shielded wire braid. Just finished soldering, use tweezers or a small "one" Word screwdriver pry quietly, manifold blocks will be removed.

Solder melt growth method of Assembly: the approach is an easy way, you only need to be assembled block grew a little solder on the pins, so that each column pin solder connected, so in order to facilitate heat transfer, easy Assembly. Assembly soldering iron heating a column of pins with pointed tweezers or a small "a" screw driver to pry a skid, two heated pin rotation, until removed so far. Under normal conditions, each pin is heated twice to be removed.

Iron brush combined with Assembly method: the way easy and easy to do, just with a soldering iron and a little brush can. Assembly manifold blocks, heat the soldering iron, until the darongxi temperature the solder on the pins after ablation, which swept away the molten solder with a hair brush. This would enable the chip parting at the pins and PCB. The approach can be implemented-foot also can be broken down. Eventually use pointed tweezers or a small "one" Word screwdriver pry the manifold block.

Hollow medical needle Assembly method: take several 8-12th, hollow needles for medical use. Use needles just in integrated circuit pins. PIN solder with a soldering iron to melt when it is assembled, needles stuck pins in a timely manner, and then take a hot iron and rotating the needles, solder, such as condensed and pull out the needle. So that the pins and printed circuit boards separated as a whole. After all the pins to do so again, manifold block can be removed freely.

Absorb desoldering Assembly method: using the desoldering Assembly manifold blocks, this is a common way to professional, using tools for common suction, welding soldering iron power 35W. When assembling a chip, just the dual-use soldering iron is heated on a chip to assemble the head pin, solder Tin after ablation is inhaled in fine pewter, solder all pins after the block will be removed.

Previous: How To Find Component Info At This Internet Era

Next: No Information

Copyright © Shenzhen Rigao Electronics Co.,Ltd